1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

91 Civic hatch

Discussion in 'Reality Check' started by jdmh22accord, Sep 21, 2004.

  1. jdmh22accord

    New Member

    Joined:
    Sep 27, 2003
    Messages:
    265
    Likes Received:
    0
    Location:
    moncton
    Car is a CX, manual steering, 4 spd standard, just painted flat black with blue flames on front end,(sounds cheezy, but we got creative), 317kms on car, but just replaced engine a month ago.
    Did the multi-port swap on it at time of engine change as i put an Si motor in it.
    Engine:
    Rebuilt 91 si motor, top to bottom, only 1500 kms on it, runs very strong.
    Ported D16Z6 manifold
    JDM H22A thottle body, 60mm
    ZC clutch, low miles
    ZC exhaust manifold with LS downpipe
    No cat
    D15 crank pulley
    NGK platinum plugs
    New timing belt, and all seals and gaskets.
    My wife ran 15.4 @89mph at the sept 11-12 races at miramichi, with no
    tach.
    New drivers side axel
    New winter tires, 13"
    Very clean interior
    Drivers seat is from an Si, passenger and rear are stock vinyl.

    Car is licensed and will be inspected before sale, it needs rear strut bushings to pass, but i am doing it this week.

    Asking $1750 for it
     
  2. Killercod

    New Member

    Joined:
    Sep 13, 2004
    Messages:
    96
    Likes Received:
    0
    Location:
    Pictou Co NS
    Hey i remember that car, it was fast, would of been a closer race in the gamblers race had jay not missed thrid gear.
     
  3. alienc

    New Member

    Joined:
    Jul 3, 2004
    Messages:
    114
    Likes Received:
    0
    Location:
    Riverview, NB
    Do you have any pics of the car?
     
  4. jdmh22accord

    New Member

    Joined:
    Sep 27, 2003
    Messages:
    265
    Likes Received:
    0
    Location:
    moncton
    i will try to get some tomorrow, i see you are in riverview, i live on suffolk street at the bottom, if you want to come see it sometime, or the car is parked behind moncton honda all day everyday, i work there in the shop, so stop in.
     
  5. alienc

    New Member

    Joined:
    Jul 3, 2004
    Messages:
    114
    Likes Received:
    0
    Location:
    Riverview, NB
    I think I have seen that one at Moncton Honda before. Is there a reason you are selling so cheap? Seems like it would be worth more than that with all the work that has been done on it.
     
  6. jdmh22accord

    New Member

    Joined:
    Sep 27, 2003
    Messages:
    265
    Likes Received:
    0
    Location:
    moncton
    it is worth more, but im not looking to get rich off of it, just sell it, i need it sold asap, as i am buying a truck
     
  7. Still slow

    New Member

    Joined:
    Jul 12, 2004
    Messages:
    157
    Likes Received:
    0
    Location:
    Riverview N.B
    Hey Ben I got a digi cam now if you want some pics
     
  8. jdmh22accord

    New Member

    Joined:
    Sep 27, 2003
    Messages:
    265
    Likes Received:
    0
    Location:
    moncton
    bump, car was inspected today. Replaced both upper ball joints and rear control arm bushings, ready to go asap
     
  9. jdmh22accord

    New Member

    Joined:
    Sep 27, 2003
    Messages:
    265
    Likes Received:
    0
    Location:
    moncton
  10. jdmh22accord

    New Member

    Joined:
    Sep 27, 2003
    Messages:
    265
    Likes Received:
    0
    Location:
    moncton
    Sold........thank you come again
     

Share This Page